WDRR
Window & Door Rot Restoration
Wood Rot Restoration
When it comes to almost any part of your house that is suffering from rot due to leaks or high levels of moisture / humidity it can be very costly to have everything replaced. If rot damage is detected early, you could save yourself a lot of money.
The way we treat rot damage is by using a thin solution of epoxy resin compounds to lock out water & waterproof timbers. This is referred to as a chemical cure which consists of a two part solution (base & hardener) which is applied once the majority of the rot has been removed taking 48 hours to fully cure.
This treatment is of high quality & is commonly used in treatments applied to rot damage on boats in the marine industry.
Additional Protection (Boron / Fluorine Rods)
Deep rot & moisture damage cannot always be reached by a surface level chemical cure. This problem is usually seen in large window / door frames, beams, rafters, posts, decking bearers & joists.
The solution to this is the use of concentrated Boron & Fluorine rods that are manufactured as a slow release wood preservative which diffuses into the wood over time acting as decay protection & prevention system for wood (inserted by drilling a 45-degree angle into the affected wood & pushing the rods in so they sit at the base of the desired treatment area).
Boron / Fluorine rods will protect the treated areas that are prone to rot, termite or fungal attack (up to 10 years protection).
Installations
If you have windows, doors, decking, etc. that has irreversible damage or simply want new installations, rest assured as our professional approach can help with just about any project within reason.
Painting & Sealing
This is another service offered with a personalised approach and close attention to detail. In most cases painting, sealing and waterproofing is done upon completion of most restoration & installation projects but is also offered as a separate service.